| PARAMETER | CUT-40 | CUT-70 | CUT-100 | CUT-160 |
| INPUT POWER VOLTAGE (V) | 1P 230 ±15% | 3P-415 ±15% | 3P-415 ±15% | 3P-415 ±15% |
| FREQUENCY (Hz) | 50/60 | 50/60 | 50/60 | 50/60 |
| RATED INPUT CURRENT (A) | 22 | 11.9 | 23 | 38.2 |
| NO-LOAD VOLTAGE (V) | 230V | 240V | 311V | 307V |
| OUTPUT CURRENT ADJUSTING RNAGE (A) | 15-40 | 15-70 | 20-100 | 20-160 |
| Rated Output Voltage (A) | 96 | 104 | 120 | 144 |
| Duty Cycle (%) | 60% | 60% | 60% | 60% |
| NO-LOAD POWER (W) | <100W | <100W | <100W | <100W |
| Efficiency (%) | 80% | 85% | 85% | 85% |
| POWER FACTOR | 0.73 | 0.93 | 0.93 | 0.93 |
| AIR PRESSURE(MPA) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.5-0.6 |
| AIR FLOW(L/MIN) | 100 | 100 | 130 | 130 |
| Insulation Class | F | F | F | F |
| Case Protection Class | IP21 | IP21 | IP21 | IP21 |
| Weight (KG) | 8 | 19 | 36.5 | 60 |
| Overall Dimension (mm) | 375×155×232 | 480x204x303 | 560×370x350 | 670×337x510 |
| CUTTING THICKNESS(MM) | 10 | 20 | 1-40 | 1-60 |
| Input power capacity (KVA) | 6 KVA | 7 KVA | 15 KVA | 25 KVA |
| ARC Initiating | (touch) | (touch) | (untouch) | (untouch) |
| Base Material | Plate Thickness(mm) | Arching Way | Current Range (A) | Applicable Modle |
| All Types of Carbon steel ,Stainless steel Low - alloy steel | ||||
| 1.0 - 6 | Contact | 15-40 | CUT-40 | |
| 2.0-15 | Contact | 15-70 | CUT-70 | |
| 2.0 - 25 | untouched | 20-100 | CUT-100 | |
| 2.0 - 50 | untouched | 20-160 | CUT-160 | |
| Thickness may vary from metal to metal (refer scale) | ||||
| AI, Cu, Copper Alloy, Aluminum Alloy |